ghost immobiliser review is an advanced system that blocks your car from starting without an exclusive pin code sequence, entered via existing buttons (such as the ones on the dashboard or steering wheel). The device is unnoticeable to thieves and operates quietly.
It also helps to deter newer methods like hotwiring and relay thefts. It could also lower the cost of insurance.
No Radio Frequencies
Ghost immobilisers differ from a traditional one in that it doesn't transmit radio frequency, which makes it impossible for thieves to bypass the device using a cheap key cloning device. This means that a ghost immobiliser will stop your car from being activated even if a criminal has successfully cloned your key or taken it.
A ghost immobiliser is also effective against so-called relay attacks. These are when you amplify the signal from your key fob in order to trick the system into allowing your car to start. The Ghost can recognise this and will refuse to start your vehicle, and require you to input the PIN code. This is an excellent way to combat tech-savvy thieves with access to low-cost and simple equipment to copy or steal your car.
The Ghost can also be fitted discreetly (without causing any damage to your vehicle) and will only work when the correct pin sequence is entered. It is only accessible to the owner, so no one else is able to use your vehicle unless they have your pin code. Certain systems allow the owner to set up a valet mode or service mode, which allows them to temporarily let another person use their vehicle without having to reveal their pin code. This protects the vehicle from thefts that could be triggered by opportunistic means.
As well as being very user friendly and quick to disarm and disarm, the Ghost can be linked up with a car tracker, making it possible to track your car. ghost immobiliser problems offer discounts on insurance for vehicles that have Ghosts installed. This is great news as it enhances the security of your vehicle.
Although the Ghost immobiliser is not Thatcham certified but it is an aftermarket item that has been tested by an independent party and proved to be effective. If you are thinking of purchasing a used vehicle that comes with the Ghost immobiliser fitted, then inquire with the seller if they're willing to transfer it to the vehicle you are buying. This will ensure that your new car is more secure than it was if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit breaks means that even in the event that your car is stolen, thieves will not be able to get it started. They'll need to know the sequence of buttons used to unlock your vehicle and they will not be able to do so if they aren't possessing this knowledge. This will further deter them and ensure that they do not attempt the theft at all as they may not be able to leave with the vehicle.
If you have an GPS tracking device it, the Ghost can act as an anti-theft device. It can send a signal that can activate a siren to warn the tracker of a theft attempt. This feature can be turned off at any time via your online dashboard.
When you connect your Ghost to the CAN data network it will identify your vehicle and its owner using the unique pin code you programmed during installation. This enables the device to connect directly with the ECU of your vehicle and disable its engine. This means that only the owner of the vehicle or a person who has the PIN number, is able to start the engine.
Since the pin code is created from existing buttons within easy reach of the driver (such as cruise control and stereo mute) it remains mathematically impossible to guess by any potential thieves. Your engineer will present you with an Pin Code Override Card that is like scratch-off tickets from lottery. It simply must be scratched to reveal the code.
Your Ghost is not detectable by these methods since it does not employ circuit breakers or radio frequencies. This means it is not affected by the modern methods used by organized criminal gangs that specialize in codes-grabbing technology and RF scanning. It's also a lifetime product, and it can be removed from your car when you sell it, which means that you won't lose any of the protection that you have invested in.
No Key Fobs
With increasing theft of vehicles in the UK proactive measures are required to protect precious vehicles from thieves who are opportunistic. The groundbreaking Ghost Immobiliser from Autowatch offers a robust defence against key cloning, hacking and signal relay attacks. It is a discreet and highly effective security system for cars that is easy to install in a wide range of automobiles.
The Ghost immobiliser is not a typical system that relies on key fobs. It also doesn't make use of a signal relay. This means it is not affected by signal interception and cannot be activated by stolen or hacked remotes. It's also tamper-proof, and doesn't have any external wiring, making it difficult to take off.
It shields your pride and joy from hacking, key-longs, and key theft by preventing the engine from beginning until you input a specific PIN code. This is accomplished by using buttons that are already present in the vehicle such as those found on the steering wheel, door panels and centre console to design a customised disarm sequence that can be up to 20 presses long (like entering a PIN in your smartphone).
It will only work when you enter the correct pin code. This makes it impossible for thieves who have a chance to steal your car. It is designed to be easy to use. If you're worried about losing the pin code, the installer will provide you with an emergency driver fob which allows you to use your car in the same way as you normally would.
The Ghost immobiliser cannot be detected by devices for diagnosis, such as RF scanners or other devices used by thieves. This installation that is stealthy increases the effectiveness of the system and permits it to be placed in a place that is difficult to steal.
Ghost immobilisers are a cheap and highly effective deterrent against theft and improve the value of your car. They are also recognised by some insurance companies and may result in reduced premiums.
No Damage
You can be confident that your vehicle will be secure from hacking and cloning and key fob theft, as well as other common theft methods, if fitted with an immobiliser. This is especially important if you've put in a lot of money and time customizing your car or own an expensive or rare model. Ghost immobilisers are silent and require no additional parts or installation.
The system works by using buttons on your steering wheel, center console, or door panels. It allows you to set up a pin code sequence that must be entered before the engine can begin. The sequence can be changed by you at any time, ensuring that even if a burglar knows your pin number and is able to start your car. It is also simple to disable the device when it is in an unservice valet mode to allow your car to be removed for servicing, cleaning or an MOT without it being activated.
The criminal won't be able to start your car in the event that it is copied and will thus be caught. The system will be alerted to any tampering of the wiring in your vehicle like signal interception or cutting. This information can be sent to your smartphone so that you're always aware of the security situation of your vehicle.
However, there could be a point at which you need to remove or disable the Ghost Immobiliser, perhaps to maintain it or sell it. In this scenario you'll need follow a careful process in order to disconnect the device without causing damage to your vehicle's wiring system. It is highly advised to wear safety gloves during this process, and use an emergency flashlight to illuminate the dark areas of your vehicle in which the immobiliser might be installed. It is also advisable to refer to any installation instructions or user manuals you might have in order to locate the specific location of the device.
Once the immobiliser has been disconnected from your vehicle's wiring system, you are able to reconnect the car battery and test to make sure that it works as intended and that all electrical components function according to their intended purpose. It is then time to connect any wires that were cut, using soldering or electrical tape where required. Make sure that no exposed wires are present and that any hanging wires are secured with zip ties or other appropriate means. To ensure that your vehicle won't be damaged by the removal process, you should schedule a professional vehicle checkup.